Otsi dokumente »
Interneti ja rakenduse NIBE Uplink abil saab kiire ülevaate soojuspumba ja maja küttesüsteemi seisukorrast.Loe edasi »
NIBE F370 is part of a new generation of heat pumps, which have been introduced to supply your home with inexpensive and environmentally friendly heating. Heat production is safe and economical with integrated hot water heater, immersion heater, low energy circulation pump and control system.
The heat pump can be connected to an optional low temperature heat distribution system. e.g. radiators, convectors or under floor heating. It is also prepared for connection to several different products and accessories, e.g. extra water heater and heating systems with different temperatures.
NIBE F370 is equipped with a control computer for good comfort, good economy and safe operation. Clear information about status, operation time and all temperatures in the heat pump are shown on the large and easy to read display. This means, for example, that external unit thermometers are not necessary.
See all technical data in the product leaflet.
* The reported efficiency of the package also takes the controller into account.
Juhi oma NIBE soojuspumpa, kus iganes ka viibid. Lülita sisse kütmine teel koju või kontrolli oma kodu sisekliima seisu, kus tahes Sa ka ei viibiks.
Lisainfot NIBE mobiiliäpi kohta leiab veebilehelt play.google.com >>
1. Mine internetikeskkonda Google Play2. Kirjuta otsingusse NIBE3. Lae rakendus alla
Või skanneeri oma android telefoniga allolev QR-kood.(Vajalik skanneerimistarkvara olemasolu telefonis).
NIBE DEH 40/41 is used for F370/F470 to enable connection and control of external heat sources as follows:
The heat pump ventilates the building and recovers energy from the ventilation air. The heat is used to heat the building and the hot water. Normally additional output occurs via the heat pump’s immersion heater in the event that the heat pump output is not sufficient. The above alternative gives this additional output using external heat sources. If the power is not available in the external heat source the immersion heater is automatically engaged.In order to dock an external heat source the heat pump must be supplemented with two docking pipes, which are included in the docking kits DEH40/41.
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.Item no: 067061
ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
Item no: 067099
Toote nr: 067152
Item no: 089741
Item no: 067064
Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.
Item no: 067073
Item no: 067127
Item no (2050 mm): 089756Item no (2150 mm): 089757Item no (2200-2450 mm): 089758
UKVS 230 is intended to be used for heat storage when a smaller heat pump is docked with solar panels. It is also possible to dock another heat source.
Item no: 067227
A un Angleso it va semblar un simplificat Angles, quam un skeptic Cambridge amico dit me que Occidental es. Li Europan lingues es membres del sam familie. Lor separat existentie es un myth. Por scientie, musica, sport etc, litot Europa usa li sam vocabular.